Prepared by Philip Levis
This installation involves downloading two large files, VMware Workstation and a 3.2GB virtual machine, so can take a long time. Complete these steps before attending lab.
If you have a Windows laptop, the easiest way to get a good development environment for CS107E is to run Linux within a virtual machine. You’ll use Windows normally, but will have a window in which a full Linux system is running.
If you have a Mac laptop, you can install the tools directly in MacOS using this guide and do not need to use a virtual machine.
We’ve prepared a VM with Linux and all of the needed tools installed on it. To get it running, you’ll need to do 4 things:
Install VMware workstation. Go to https://sustainable.stanford.edu/campus-action/energy/sustainability-information-technology/vmware and scroll down to SOFTWARE FOR ACADEMIC/RESEARCH PURPOSES and follow the Software Licensing Store link. Scroll down to VMware and click on VMware Workstation 14. This is a personal, not a lab, download. Use your own SUNet ID. When you check out, the checkout page will give you a download button as well as a license key to use. Copy the license number into a text file and save it.
Install VMware workstation and enter the license key.
Download the virtual machine. You can find it at http://www.stanford.edu/~plevis/107E%20Ubuntu%20VM.zip Note that it is 3.2GB in size: I recommend that you plug into a wired connection to download it. Don’t put the VM on an external hard drive, since USB is much slower than SATA. Since you’re running another whole computer which needs to load all of its data out of the VM file, this is like trying to run a full computer off of a USB drive: slow!
Unzip the virtual machine and run it. Open the .zip file and copy the directory into “My Documents/Virtual Machines”.
Open VMware workstation and open the CS107E Ubuntu VM. Click on the green start icon. You may get a warning message or two: for SATA, tell it to always check, for USB, click OK (when I shut down the VM it had a Raspberry Pi plugged in). Your login is “Raspberry Pi Hacker” and the password is ‘cs107e’. You can click on the terminal icon on the left to open a terminal. There is a subdirectory cs107e that has your tools and a little bit of source code in it.